“Bass controls sub”” changes the
functionality of the factory bass control
and creates a subwoofer level controller
using the analog sub output. “Bass
controls Bass” allows the factory bass
control to affect all speakers in the
system.
A thorough explanation of the
functionality of the downmix settings
is contained on the next page.
Voice gain allows you to increase
or decrease the phone volume
settings globaly.
Changes the two adjustable time
alignment settings to be measured in
inches, centimeters or miliseconds.
Global output adjustments: At -0dBFS
the unit provide a full-scale output. At
full volume, minor adjustments of the
factory bass or treble can produce
digital clipping. With the bass and treble
set to neutral the unit will not clip at full
volume. -7dB provides the ability to
adjust the factory tone controls
moderatly without clipping at full
volume and -12dB allows for maximum
adjustment of the OEM controls
without clipping.
Selecting “loudness on” will boost
low & high frequency response at low
volume. The curve will be active until
half volume where it will be completely
flat
ZEN Global Output Configuration
7