BHM
10/18/18
NTV-DOC281
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
8 |
P a g e
W204-H Operation
•
Once the W204-H is connected properly, reverse activation is automatic. Placing the
vehicle in reverse will display the connected camera’s image automatically.
Note: If display doesn’t switch to reverse image when shifting into reverse or screen is
distorted, check dip switch settings on page 2.
Note: If all dip switch settings have been tried, connect the provided ‘Reverse Trigger Input’
wire (green) and supply this wire with an OEM reverse 12v (+) signal.
•
Press and hold the
back arrow
on the steering wheel to cycle the screen from OEM
image, to HDMI (if adapter was added), to connected front camera (if no change, try
check Dip Switches 1 & 2 and your menu settings). Otherwise, the front camera will
display (whenever you leave the
reverse gear)
for the user-set amount of time (5, 7, 9
seconds, etc).
