BHM
10/18/18
NTV-DOC281
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
4 |
P a g e
7.
Connect the white, 10-pin POWER/CAN plug to the W204-H interface at the port labeled
‘POWER/CAN’
.
8.
Install and run your reverse camera’s power, ground & signal
up to the radio/W204-H
Interface location. Connect the signal RCA to the provided RCA end labeled
‘CAMERA’.
9.
Find a solid ground wire (radio’s ground) and an ACC 12v (+) source to power your
camera. Alternatively, you may use the provided
purple wire
for
reverse 12v (+)
power
only.
10.
Optional:
If adding an additional video input (including front camera), use the provided
RCA labeled ‘
CVBS IN
’ for signal input. This video source
must
be powered with an ACC
source.
NOTE: If the user desires for automatic front camera-switching, this option must
be set upon installation. See MENU Settings on page 7.
