Toyota 4 Navigation System Installation
1 |
P a g e
2014 – 2015
Highlander (non-apps Pioneer Radio)
2015
Camry (non-apps Pioneer Radio)
** Toyota 4 navigation system only compatible to vehicles listed above. All
compatible radio should be non-apps radio (basic Pioneer radio with 6.1” touch
screen). Please verify the radio has no APPS button on front plate for this system to
install and work properly. **
WARRANTY DISCLAIMER NOTICE!
Radio removal, disassembly, installation of Navigation
Electronics, and Radio re-assembly / re-installation is the responsibility of the installer. It is recommended
that you contact a professional installer that is experienced with proper work methods involving electronics
and knowledgeable of specific procedures for radio disassembly, Navigation Electronics installation, and
re-assembly / re-installation of the Radio Head Unit in the vehicle.
INSTALLATION DAMAGE TO
THE VEHICLE RADIO HEAD UNIT IS EXPRESSLY NOT COVERED UNDER THE PRODUCT
WARRANTY.
To avoid dangerous distractions that may lead to an accident, the driver should never operate the system
while the vehicle is in motion. Before installing the product, the seller should inform the end-user of
proper use and compliance with the proper instructions and all states and federal laws.
Before beginning your installation, familiarize yourself with the installation instructions and the Navigation
system components.
CAUTION:
It is advisable to disconnect the negative battery cable for 3 minutes before beginning
installation, to avoid unintended air bag deployment. Note and record any anti-theft radio codes prior to
disconnecting.
Highlander Dash / Radio Removal
Factory Radio / Dash
Pull and remove bottom trim piece by hand
Pull and remove A/C control with trim
Pull and remove top trim piece by hand
NTV-DOC227
