Toyota 4 Navigation System Installation
3 |
P a g e
Carefully route supplied PCB ribbon cable thru the slot. Then connect both display and touch
ribbon cable to factory board as shown
Connect factory ribbon cables to the PCB as shown above and secure the board with supplied
studs and screws
A + B
Connect the 2in1 cable to the socket with METAL pin facing up and route cable to
the left bottom as indicated
C
Connect the factory ribbon cables to PCB. Align properly ensure fully seated inside
of sockets
D
Factory connecting ribbon cable to radio chassis should be routed under the PCB as
shown
NTV-DOC227
