BHM
10/04/18
NTV-DOC266
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product.
If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger
entertainment only.
15 |
P a g e
CHRY MULTI-CAM Operation Information (continued)
Activate CIM* (Control in Motion):
To activate CIM for
factory navigation, press and hold the ‘Volume’ button for 3
seconds (CIM will disable automatically after 3 minutes). This
function will also keep the Cargo Camera enabled for 3
minutes, and will reset upon every key cycle.
NOTE: Activating the CIM function will NOT bypass video in
motion at this time, if equipped.
Turn Signal Cameras:
To display TSCs, simply use the turn
signals as you would normally and the connected image will
display either all the time (while in drive), or only after 25, 30
or 35 mph respectively, depending on what was set in MULTI-
CAM programming.
•
Additionally, the user may use a “bump method” to
view the TSC quickly. Toggling the turn signal level
quickly (just enough to engage the bulb) will display
the TSC image for about 3 seconds.
3 seconds
*Not supported on all vehicle models.
