NAV TOOL SAAB 9-5 2009-2011 Скачать руководство пользователя страница 6

Страница: 6 / 34

SAAB 9-5 2009-2011

Universal Harness Description

Left Camera Input/ Video Input 3

Right Camera Input/ Video Input 4

Front Camera Input/ Video Input 2

Rear Camera Input/ Video Input 1

Connector for Microphone Input

Connector for Controller

Connector for

Vehicle Specific Harness

Manual Activation Wire

12V Output Wire

Rear Camera Input /Video Input 1-

This input is dedicated for an aftermarket rearview camera or a video source with an

RCA video output. Your vehicle factory camera will continue to work as before without any changes.

Front Camera Input /Video Input 2-

This input is dedicated for an aftermarket front view camera or a video source with

an RCA video output. Your vehicle factory camera will continue to work as before without any changes.

Left Camera Input / Video Input 3-

This input is dedicated for an aftermarket left view camera or a video source with an

RCA video output. Your vehicle factory camera will continue to work as before without any changes.

Right Camera Input / Video Input 4-

This input is dedicated for an aftermarket right view camera or a video source with

an RCA video output. Your vehicle factory camera will continue to work as before without any changes.

Connector for Vehicle Specific Harness-

This connection is dedicated for connecting vehicle specific plug and play

wiring harness.

Connector to Controller-

Not Used

Connector for Microphone Input-

Not Used

+12V Manual Activation Input-

This connection is used only if the factory rearview camera is not operating correctly

in reverse. In that case, this wire must be connected to the vehicle’s r12V output. (Change setting “Manual

Activation Wire as +12V Reverse Input” See page 41)

+12V Output-

500 mA output can be used to drive a relay. This output pr12V at all times when the vehicle is

running.

NavTool Interface Harness

(Part # NT-WHNT6)

Содержание SAAB 9-5 2009-2011



































Результаты поиска

Содержание SAAB 9-5 2009-2011

Отзывы:

Похожие инструкции для SAAB 9-5 2009-2011

Бренды по названию

Популярные бренды

NAV TOOL SAAB 9-5 2009-2011, Руководство по установке

Результаты поиска

Содержание SAAB 9-5 2009-2011

Отзывы:

Похожие инструкции для SAAB 9-5 2009-2011

Бренды по названию

Популярные бренды