Nautilus U10, Руководство владельца и инструкция по сборке

Страница: 16 / 60

24. Remove the (6) 1/4-20 pan head screws
from the rear of the console. Position the
console against the mounting plate so that the
holes are aligned. Secure the console to the
mounting plate using (4) 1/4-20 pan head
screws as shown in Figure 3. Use the #2
phillips head screwdriver to tighten.
25. Position the iPod holder against the
console so that the holes are aligned.
Secure the iPod holder to the console using
(2) 1/4-20 pan head screws. Use the #2
phillips head screwdriver to tighten.
NOTE: Do not connect the 15V power supply to the machine until
the console has been installed! If the console must be removed
and disconnected for any reason, ensure that the power supply is
disconnected first!
Figure 3
assembly questions? call 800-235-2233 for help. 16