background image

48

Condition/Problem

Things to Check

Solution

No display/partial display/
unit will not turn on

Check electrical (wall) 
outlet

Make sure unit is plugged into a functioning wall outlet. Test the 
outlet with a known functioning device such as a lamp.

Check connection at front 
of unit

Connection should be secure and undamaged. Replace power 
cord or connection at unit if either are damaged.

Check data cable integrity

All wires in cable should be intact. If any are visibly crimped or 
cut, replace cable.

Check data cable
connections/orientation

Be sure cable is connected securely and oriented properly. Small 
latch on connector should line up and snap into place.

Check console display for 
damage

Check for visual sign that console display is cracked or otherwise 
damaged. Replace Console if damaged.

Console Display

If Console only has partial display and all connections are fine, 
replace the Console.
If the above steps do not resolve the problem, contact Customer 
Care for further assistance.

Unit operates but Contact 
HR not displayed

Sensor grip

Be sure hands are centered on HR sensors. Hands must be kept 
still with relatively equal pressure applied to each side.

Dry or calloused hands

Sensors may have difficulty with dried out or calloused hands. 
A conductive electrode cream (heart rate cream) can help make 
better conduct. These are available on the web or at medical or 
some larger fitness stores.
If tests reveal no other issues, contact Customer Care for further 
assistance.

Unit operates but Telemet-
ric HR not displayed

Chest Strap (optional)

Strap should be “POLAR

®

” compatible and uncoded. Make sure 

strap is directly against skin and contact area is wet. Make sure 
the transmitter has the curve oriented upward.

Check User Profile

Select the Edit User Profile option for the User Profile. Go to the 
WIRELESS HR setting and make sure that the current value is 
set to ON.

Interference

Try moving unit away from sources of interference (TV, Micro-
wave, etc). 

Replace Chest Strap

If interference is eliminated and HR does not function, replace 
strap.

Replace Console

If HR still does not function, contact Customer Care for further 
assistance.

Unit operates but Telemet-
ric HR displayed incorrectly

Interference

Make sure that the HR receiver is not blocked by a personal 
electronic device in the left side of the media tray.

Speed display is not ac-
curate

Display set to wrong unit of 
measure. (English/Metric)

Change display to show correct units.

TROUBLESHOOTING

Содержание T614





















































Отзывы: