background image

Page 5 

 

Check for damaged parts 

 

DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by 
Nautilus® and Core Health & Fitness.  
 
MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information. If 
unreadable or missing, contact Nautilus for a replacement.  
 
MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping 
the product in safe operating condition.  Failure to conduct preventative maintenance by the owner may cause the 
product to operate in an unsafe manner.  Equipment needs to be inspected and maintained at regular intervals per the 
preventative maintenance schedule provided in this manual. 
 
Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. 
Nautilus will provide service and maintenance training at our corporate facility upon request or in the field if proper 
arrangements are made.  

 
Safety and warning information 

 

Specific operating warnings 

 

1.This equipment is designed for use in a commercial gymnasium or health club. To ensure the proper use of the 
equipment in a safe manner, all users of the equipment should read this manual before using the machine. This machine 
should be made a part of your club training program in order that the equipment is used by your members in a safe 
manner as intended. In addition to instructing the club members in the proper use of the equipment, the club member 
should obtain a complete physical examination form their health care provider before beginning any exercise program. 

 

2.This machine is not intended to be used by children. It is not intended to be used by persons with reduced physical, 
sensory, or mental capabilities or lack of experience and knowledge, unless given instruction and under the personal 
supervision concerning use of the machine by a person responsible for their safety. Do not leave children unsupervised 
around the machine. 

 

3.Do not over exert yourself during exercise. Stop exercising if you feel pain or tightness in your chest, become short of 
breath or feel faint. If you feel pain or experience any abnormal symptoms, stop exercising and consult your health care 
provider. 

 

4.The safety and integrity of this machine can only be maintained when the equipment is regularly examined for damage 
and wear and repaired. It is the sole responsibility of the owner of this equipment to ensure that regular maintenance is 
performed. Worn or damaged parts must be replaced immediately or the equipment removed from service until the repair 
is made. 

 

5.DO NOT attempt to fix a broken or jammed machine. Contact appropriate staff or Nautilus Service. 

 

6.Ensure all adjustment and locking features are properly secured before using the equipment. 

 

7.Load plates evenly and carefully to avoid tipping equipment and possible crushing injuries. DO NOT exceed maximum 
load of 720 lbs. (327 kgs). 

 

8.Use a spotter for all activities. 

 

 

Содержание NP-L8500























Отзывы: