Nautilus HYDRO-FORCE MX3-500HE, Руководство по эксплуатации

Страница: 27 / 57

27
Maintenance
Proper maintenance is required to keep the MX3-500HE operating properly, prevent
downtime and to extend the life of your equipment.
This machine is an electrical appliance.
Care must be taken to reduce the risk of electrical shock.
Disconnect electrical power before performing any service or
maintenance inside machine base or before testing or repairing switches or power
cords. Failure to do so may result in severe personal injury or death.
OPERATION INTERVAL Page #
CLEAN CHEMICAL FEED FILTER & FOOT VALVE Daily – After Each Job 28
CLEAN VACUUM SHUTOFF ASSEMBLY SCREEN Daily – After Each Job 28
CLEAN HYDRO-FILTER II Daily – After Each Job 29
RINSE OUT RECOVERY TANK Daily 29
CLEAN WASTE PUMP-OUT PUMP Daily 30
FLUSH SOLUTION TANK AND PUMP Daily 30
CLEAN PUMP-INLET FILTER Weekly – As needed 31
FLUSH CHEMICAL SYSTEM Monthly 32
LUBRICATE REGULATOR PISTON SEAL Monthly 33
CLEAN DRAIN VALVE As needed 34
STORAGE PREP – FREEZE PROTECTION As needed 35
Section
3