Page 14
Inspection
Visual inspection of your units will insure a safe environment for your clients and alert you to any issues that
may require maintenance prior to equipment failure. Proper, timely visual inspection is a critical component to
the long term care of your product.
• Cables should be inspected weekly for damage including cracked vinyl housing, fraying metal strands,
twisting or excessive rubbing on pulleys. Any incident of wear should elicit immediate replacement
of damaged cable. While the full length of the cable should be inspected, particular focus should be
placed on specific areas where the cable passes through pulleys or closely adjacent to stationary
components of the product.
• Cables may become loose over time and require adjustment to maintain proper function – refer to your
specific installation manual for cable tension instructions.
• Visually inspect all position selector pins weekly for damage and/or excessive wear and replace pin
assembly if damage and/or excessive wear is identified.
• Fasteners, hardware and attachments should be checked monthly for looseness. Tighten as required
using appropriate tools.
• Handgrips should be checked for wear or damage monthly and replaced as needed.
• Upholstery should be inspected for wear or damage monthly and replaced as needed.
• Pulleys should be inspected every six months for integrity, cracking or rubbing leading to excessive
wear. Any incident of wear should elicit immediate replacement of damaged pulley.
• Main frame and tower should be inspected every six months for signs of unusual wear, corrosion or
structural integrity issues.
• Inspect the cable end weekly for damage and to ensure the locknut is secured in place. Any issue in this
area shall elicit immediate service and in the case of damage, replacement of the cable assembly.
• Also, upon inspection, if position selector pin cannot be fully engaged into the selector hole (as
indicated on the warning label on the product (see
Important Label Locations
for warning label
location and image), the product shall be marked out of service until an authorized service technician
can evaluate the product for further necessary action.
