Page 13
TOOLS
Working on this product will require basic and/or sometimes specialty tools based on the type of service that
will be performed at any time. To assist, we recommend having the tools listed available when performing
maintenance.
Tool
Metric Allen Key Set
Screwdriver Set, Phillips
Metric Open-Ended Wrench Set
Screwdriver Set, Flat
Large Adjustable Crescent Wrench
Torque Wrench
Metric Socket Set
MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as
keeping the product in safe operating condition. Failure to conduct preventative maintenance by the owner
may cause the product to operate in an unsafe manner. Equipment needs to be inspected and maintained at
regular intervals per the preventative maintenance schedule provided in this manual.
Cleaning
Keeping your Strength units clean is an important component of preventative maintenance and the overall
aesthetics of your product. While your clients will appreciate clean equipment free of sweat, dirt and other
contaminants proper care and cleaning will extend the life of your product and reduce premature aging and
wear. See the maintenance schedule for recommended frequency.
• Guide rods should be cleaned monthly with a cotton cloth prior to lubrication. It is critical to remove all
old lubricants and accumulated contaminants prior to applying lubrication.
• Internal tower and weight stack should be cleaned once every six months with a mild soap and water
dampened cloth to remove all dust and accumulated contaminants. Caution should be taken to not
leave excess moisture after cleaning.
• For general cleaning: A solution of 10% mild soap with warm water applied with a soft damp cloth OR
Formula 409 applied to a cloth then wiped onto the upholstery.
Note – do not use cleaners that contain solvents, alcohol or abrasives.
• For disinfecting: 1:10 Bleach/Water mix. After cleaning, rinse area with clean water, then dry with a
clean, lint-free cloth. Failure to remove chemical residue will cause discoloration of the coated fabric
surface to manifest earlier in the life cycle of the product
• Inclusion in this document does not imply “fit for use.” Customers should first determine if products are
appropriate for use on their surfaces
• Should other cleaning methods or products be employed, carefully try them in an inconspicuous area
to determine potential damage to the material. Never use harsh solvents or cleaners which are intended
for industrial applications. To clean stained or soiled areas, a soft white cloth is recommended. Avoid
use of paper towels.
CAUTION:
Cleaning products may be harmful/irritating to your skin, eyes, etc. Use protective gloves
and eye protection. Do not inhale or swallow any cleaning product. Protect surrounding area/clothing from
exposure. Use in a well-ventilated area. Follow all product manufacturer’s warnings. CORE Health and Fitness
cannot be held responsible for damage or injuries resulting from the use or misuse of cleaning products.
MAINTENANCE
