N
A
U
TI
LU
S
®
IN
S
TA
LL
A
TI
O
N
C HA NG I N G T H E G A M E I N H EA LT H A N D F I T N E S S
™
4
Treadmill Power Plug Receptacles
The Commercial Series T19.14 Treadmill has two power plug receptacles
allowing you to plug in the treadmill from the front or the rear of the machine.
The rear power cord receptacle, located underneath the right side of the side
rail, should be used if the treadmill is going to be placed in the center of the
room facing away from the wall. The front power cord receptacle, located on the
front side of the motor pan, can be used if the treadmill is placed facing a wall or
parallel to a wall.
INSTALLATION & OPERATION
Turning On the Power
After you have determined which end of the treadmill to plug in, the
treadmill can be turned on by moving the power switch located at the front
of the treadmill, to the ON position.
Understanding the Display and Controls
The treadmill display is a computerized panel used to operate the treadmill and
see all workout data and operational status. You should familiarize yourself with
the operation of the treadmill and the location of all keys before beginning use.
Limited Access Control/Magnetic Safety Stop
Limited-access control lets you restrict treadmill use to authorized personnel.
It also lets you stop the treadmill in an emergency. The magnetically-activated
control is located on the bottom of the display as shown. The limited-access
control is deactivated on machines shipped from the factory.
Power Switch
Attach power cord here if your
treadmill will be facing a wall
or will be parallel to a wall.
Attach power cord here
if your treadmill will
face away from the wall .
Emergency
Stop
Magnet
