![background image](http://html.mh-extra.com/html/nautilus/be-strong-commercial-series-u916/be-strong-commercial-series-u916_manual_711575009.webp)
ASSEMBLY GUIDE
Step 2:
Locate the following for this step:
Parts:
s
Handlebar (E)
Hardware:
s
Ref #6 Allen Head Bolt
M8x20
Qty. 4
s
Ref #7 Spring Washer
M8
Qty. 4
Tools:
s
6mm Allen Wrench
2-1 Connect the attached long Wire Tie (L) to the
handlebar cables (M) and use it to pull the cables
out through the Mast (B) as shown in fig 3. Keep
the wire to attach the cable again.
2-2 Align the Handlebar with the holes in the Mast.
2-3 Install and completely tighten the hardware.
Figure 2:
E
7
B
6
L
R
9
Содержание Be Strong Commercial Series U916
Страница 1: ...Be Strong 003 3376 060309A Rework Manual Commercial Series Bike U916 ...
Страница 25: ...Place mast in carton Remove seat from bike Get 000 4897 bag and place over seat assembly 25 ...
Страница 31: ...Band box shut on both ends Place bands where the upright supports are in box 31 ...
Страница 33: ...The Multi Build FISP Load screen should look something like this OR 33 ...