Nautilus 6 Series, Руководство пользователя

Страница: 17 / 42

UNPACKING & ASSEMBLY UNPACKING & ASSEMBLY
Step5: Assembly console mast with console set. Step5: Assembly console mast with console set.
1).Connect the upper console wire from console to lower console wire on the right console mast. 1).Connect the upper console wire from console to lower console wire on the right console mast.
2). Put the wire and connector into right console mast.
2). Put the wire and connector into right console mast.
3). Set the whole console set on the console mast, make sure aim with the screw hole.
3). Set the whole console set on the console mast, make sure aim with the screw hole.
Fasten by hex. Wrench with 4pcs M8*15mm screw, 2pcs M8 washer and 2pcs M8 curve washer on
left console mast.
Fasten by hex. Wrench with 4pcs M8*15mm screw, 2pcs M8 washer and 2pcs M8 curve washer on
left console mast.
4). Set the whole console set on the console mast, make sure aim with the screw hole.
4). Set the whole console set on the console mast, make sure aim with the screw hole.
Fasten by hex. Wrench with 4pcs M8*15mm screw, 2pcs M8 washer and 2pcs M8 curve washer on
right console mast.
Fasten by hex. Wrench with 4pcs M8*15mm screw, 2pcs M8 washer and 2pcs M8 curve washer on
right console mast.
M8*4
M8x15mm*8
Upper console wire
Lower console wire
M8*4
15