NAUTICAST 300 1001, Руководство по эксплуатации продукта

Страница: 20 / 32

Page 20 of 32
B2 Product Manual 2_0
DATA CABLE
8.2 APPENDIX B – Pin Layout / Cable Connections
Class-B POWER CABLE
Description Wire Type Color AWG
12VDC-24VDC + Copper RED 24
GND - Copper BLACK 24
Class-B
Description DB15 Wire Type Color AWG CABLE #
RS422 TX A (output) 15 Copper YELLOW 24 CABLE 1
RS422 TX B (output) 5 Copper GREEN 24 CABLE 1
RS422 RX A (input) 4 Copper WHITE 24 CABLE 1
RS422 RX B (input) 10 Copper GREY 24 CABLE 1
RS232 TX (output) 9 Copper GREEN 24 CABLE 2
RS232 RX (input) 13 Copper WHITE 24 CABLE 2
GND 2 Copper BROWN 24 CABLE 2
GND 7 Copper BROWN 24 CABLE 3
TX OFF (silent mode) 6 Copper GREEN 24 CABLE 3
ALARM OUT 11 Copper YELLOW 24 CABLE 3
+ 14 Copper GREY 24 CABLE 3
CH2 LED RED 3 Copper BROWN 24 CABLE 4
TX TIMEOUT LED 8 Copper WHITE 24 CABLE 4
ERROR LED 12 Copper YELLOW 24 CABLE 4
CH1 LED RED 1 Copper GREEN 24 CABLE 4
+ 14 Copper GREY 24 CABLE 4
Use of the Data Cable (Part No. 300 1004)
CABLE 1:
Connect the appropriate cable ends to the designated NMEA 0183 device (Baud rate 38400).
Wire end Nauticast B2 Possible end of attached NMEA device
RS422 TX A, yellow connect to RX A (+)
RS422 TX B, green connect to RX B (-)
RS422 RX A, white connect to TX A (+)
RS422 RX B, grey connect to TX B (-)
CABLE 2:
Connect the D-SUB 9-pin connector to a matching RS232 serial interface (directly to the PC or
using a serial to USB adapter). This connection uses a Baud rate of 115200 by default.
CABLE 3:
TX OFF:
You have to connect a switch between TX OFF (green) and GND (brown). To turn transmission off,
the switch has to be activated:
TX OFF
TX OFF