NAUTICAST 300 1001, Руководство по эксплуатации продукта

Страница: 11 / 32

Page 11 of 32
B2 Product Manual 2_0
Enter vessel information items in the appropriate boxes:

MMSI number - enter the vessel's Maritime Mobile Service Identity number (see
warning and further notes regarding MMSI below!)
 Call Sign - enter the vessel's radio call sign (7 characters maximum)
 Ship name - enter the name of the vessel (20 characters maximum)
 Select the most appropriate vessel type from the drop down menu.
 Enter the vessel’s dimensions as follows, rounded to the nearest meter:
o Dimension A - distance from GPS antenna location to bow
o
Dimension B - distance from GPS antenna location to stern
o
Dimension C - distance from GPS antenna location to max. port
o Dimension D - distance from GPS antenna to max. starboard


CAUTION:
If no valid MMSI is entered (MMSI is pre-set to 000000000) the AIS transponder
will only operate in Receive mode , which means the vessel’s position is NOT
transmitted. As a consequence, the TX LED will remain on (indicating a
transmission error) even when all antennas and main power are connected.
When you have entered all of the vessel's data click the 'Save' button to program this
configuration into the AIS transponder.
A warning will be displayed asking you to verify the MMSI number. The MMSI can only be
changed by your dealer once programmed into the transponder. You can change all other
data (except the MMSI) at any time, should the need arise. Please check the MMSI and if the
number is incorrect, click the 'No' button to cancel programming of the MMSI.
Click the 'Yes' button if the MMSI is correct.
When reopening the ‘Identification’ window you can now see the vessel information stored
on the device. The MMSI number will be displayed with a grey background, to indicate that
it has been programmed and cannot be changed.
You can now disconnect the device from the USB cable / PC and install the hardware on your
vessel. A PC is not necessary for normal operation but can be useful to display all AIS data,
maps and system status. For connecting a Chart Plotter please refer to section 3 “ Connecting
external equipment”.
For additional information about the Link2AIS software please refer to the Link2AIS Software
User Guide (‘Help – Link2AIS-Help’, section Documentation).