Nauticam NA-S1H, Инструкция по эксплуатации

Страница: 18 / 35

18
2. Switch the alarm on. The LED
light will flash blue once and turn
blue for five seconds indicating
the battery is normal. Then it
goes into flashing blue light
standby mode.
3. Test the alarm by connecting the
two wires near the bottom of the
housing with a damp cotton bud;
the alarm should start giving out
a repeating “beep” sound along
with a flashing red light. The
“beep” sound and the light
should keep on going for 5
seconds after the removal of the
damp cotton bud.