7. Place the EMWL set on a steady
surface. Align the center cap
of the water jacket with the red
button on the relay lens. Gently
press the water jacket into the
water gasket until it is sealed
evenly as shown.
8. Lift the cap of water jacket open,
and fill the water jacket with
clean water. Close the cap off
after done.
To disassemble, please reverse
the above steps.
Attach the finished EMWL set to
housing port and make some test
shots before go diving.
MOUNT WATER JACKET SET WITH RELAY LENS
* Please do not open the water jacket cap underwater.
It is designed to use with clean water to prevent
particles/dirt from getting into the module joints.
