4. Align the “O" mark on the relay
lens with the center cap of
water jacket. Gently press the
gasket on the relay lens into
the water jacket (on focusing
unit) until it is completely
sealed.
Lift the cap open if the gasket
can’t be sealed into water
jacket and close it after the
gasket is mounted correctly as
shown in the diagram.
5. Mount the front gasket onto
objective lens as shown.
6. Align the “O" mark on the
objective lens with the center
cap of water jacket. Gently
press the gasket into the water
jacket
until
it
is
sealed
completely.
MOUNT WATER JACKET SET WITH RELAY LENS
