#87522A Front Gasket for 60° Objective Lens
Materials:
Silicone Rubber/Grey
Dimensions:
DIA75.00mm × 8.80mm
#87522B Front Gasket for 160° / 100° Objective
Lens
Materials:
Silicone Rubber/Grey
Dimensions:
DIA72.40mm × 20.20mm
#87522C Front Gasket for 130° Objective Lens
Materials:
Silicone Rubber/Grey
Dimensions:
DIA72.40mm × 8.80mm
#87522R Water Jacket Rear Gasket
Materials:
Silicone Rubber/Grey
Dimensions:
DIA76.44mm × 8.95mm
#87522S Front Gasket for Straight Relay Lens
Materials:
Silicone Rubber/Grey
Dimensions:
DIA72.40mm × 10.73mm
#87521 Water Jacket Body
Materials:
Aluminum Alloy with Hard Anodizing
Surface Treatment
Dimensions:
DIA73.00mm × 29.80mm
#87521C Special cap for Water Jacket use with
60° Objective Lens
Materials:
Aluminum Alloy
Dimensions:
/
SPECIFICATIONS
CARE AND MAINTENANCE
•
Soak the housing system in fresh water after
each use, during which all control buttons/knobs
should be operated a few times to avoid the
accumulation of salt residue; wipe the housing
with a towel before opening.
•
After removing the housing from the rinse tank,
carefully press the housing lock safety button for
a few times to avoid the accumulation of salt
residue.
•
After each day of diving, it is advisable to have
both the housing main O-ring and port O-ring
removed from its groove with the O-ring remover
and inspected for damage. Also check that the
O-ring retains its original circular shape; never
stretch the O-ring excessively or remove it with a
sharp object. The O-ring groove should be
cleaned to ensure it is free from any salt deposit
or foreign material; lightly coat the O-ring with the
provided lubricant before reinstalling it in the
groove. A damaged O-ring should be discarded
immediately and replaced only with one that is
provided by NAUTICAM.
Please refer to "Nauticam Product Care and
Maintenance Guide" for more details.
Remark:
Nauticam supports only e-manuals. Please download
corresponding product manuals on google drive
, or contact us for e-
manuals.
