Nautel VS300, Руководство по установке

Страница: 29 / 48

VS300 Installation Manual Commissioning tasks
Issue 6.0 2014-11-01 Page 8-7
Figure 8.5: Network Settings screen
Set during factory testing; cannot be modified
Set to ON if your network has a DHCP server. Automatically
assigns IP, netmask, gateway and nameservers.
Set to
OFF if you do not have a DHCP server or if you wish
to assign static addresses.
All addresses shown are for reference purposes only
Specify a nameserver (or DNS) to enable the use of
host names. If no nameserver is entered, only direct IP
addresses can be used to configure the email server
and any live streams such as Livewire or Shoutcast.
Typical netmask address shown. Consult with your network
administrator.