Nautel VS1, Руководство по установке, Страница: 17 / 54

VS1 Installation Manual Preparing for installation
Issue 2.0 2010-12-01 Page 1-1
Section 1: Preparing for installation
Before installing your VS1 transmitter, perform the following steps:
1. Ensure that you have performed the pre-installation tasks described in the
VS1 Pre-installation Manual .
2. Inspect the shipping box for damage. Report any damage immediately to your Nautel sales
representative and the carrier.
3. Unpack the box. Remove all items from packing and place them on a suitable work area.
Check your packing list to make sure that you received all the components, including the
VS1, VS1 Manual CD, Quick-Start Guide, Network Setup sheet, safety information, rack
mounting slide pieces, installation kit and ancillary kit.
4. Assemble your parts and tools. For a list of required tools, see “Parts and tools” on page 9-1 .
5. When you are ready to install the VS1 transmitter, follow the steps shown in Figure 1.1 on
page 1-2 .
Note:
A “VS Series Quick-Start Guide” has been provided in the transmitter shipping box.
It provides the information necessary to install and turn on the transmitter in as
few steps as possible. The information provided in this
Installation Manual provides
similar information, as well as additional details that may be desired by some
installers.
TIP When you have completed a task or step, put a check mark beside the step
number.
CAUTION:
FAILURE TO COMPLY WITH RECOMMENDATIONS MAY VOID YOUR MANUFACTURER’S
WARRANTY. FOR MORE INFORMATION, REVIEW YOUR WARRANTY DOCUMENTS.