Nautel Exporter Plus Скачать руководство пользователя страница 13

Страница: 13 / 186

Exporter Plus Technical Instruction Manual

Description

Issue 1.0 2020-05-05

Page 1-1

Section 1:

Description

This section provides a description of the Exporter Plus and its associated digital radio system.

•

Overview

•

Location - see page 1-3

•

Managing network traffic - see page 1-4

•

Diversity delay - see page 1-8

•

Physical requirements - see page 1-9

•

Cooling requirements - see page 1-10

Overview

Refer to

Figure 1.1

and

Figure 1.2 on page 1-2

The Exporter Plus represents the latest in HD Radio Exporter technology. It has the same

functionality as an Exporter, but in a smaller, more reliable and convenient package. The

Exporter Plus accepts

AES/EBU

-format audio from an audio processor. In FM systems, the

Exporter Plus will also accept program service data (

PSD

) for the main program service (

MPS)

audio and

Advanced Application Service

data from an Importer via the Ethernet port. The

MPS

audio is coded and merged with

PSD

and Importer data to create a single data stream that is

delivered to the FM exciter, also over the Ethernet port.

A secondary function of the Exporter Plus is to provide a delayed copy of the

MPS

audio. The

delayed

MPS

will become the analog component of the hybrid broadcast. The delay is

necessary for smooth blending between the digital

MPS

audio and analog

MPS

audio in areas of

poor reception. As a result, the Exporter Plus requires two

MPS

audio feeds, one of which is

simply delayed, and the other which is coded for eventual transmission on the

IBOC

carriers. In

an FM system, the delayed

MPS

audio is output as 44.1 kHz

AES/EBU

. In an AM system, the

delayed

MPS

audio is part of the IP data stream. See

“Managing network traffic” on page 1-4

for

more information.

The Exporter Plus provides an

AES/EBU

output on the back panel and a headphone jack on the

front panel for monitoring of the audio content.

The front panel has a convenient user interface consisting of an LCD graphic display, keypad

and LEDs to indicate operational status. All connections are made to the back panel.

Содержание Exporter Plus



























































































































































































Результаты поиска

Содержание Exporter Plus

Отзывы:

Nautel Exporter Plus, Техническое руководство по эксплуатации, Страница: 13 / 186

Результаты поиска

Содержание Exporter Plus

Отзывы: