Nautel Exporter Plus, Техническое руководство по эксплуатации, Страница: 16 / 186

Exporter Plus Technical Instruction Manual Description
Page 1-4 Issue 1.0 2020-05-05
Figure 1.4: Exporter Plus at Transmitter Site
Managing network traffic
Single subnet
The simplest network that the Exporter Plus can support is one configured as a single subnet
(see Figure 1.5 ). The PC user can browse to the Internet or to the web interface of the exciter,
Exporter Plus or transmitter.
Figure 1.5: Single Subnet Network
In this case, only one Ethernet port (
ETH0
) on the Exporter Plus requires configuration and IP
forwarding is not required. If access to devices on other subnets is not necessary, then gateway
address configuration is also not required.
STUDIO TRANSMITTER SITE
Audio
STL
MPS
Automation
System
To
Transmitter
Audio
STL
Exporter
Plus
PC
IP = 192.168.1.2
GW = 192.168.1.1
Router
IP = 192.168.1.1
192.168.1.x subnet
Other
Subnets/
Internet
Transmitter
IP = 192.168.1.5
Exciter
IP = 192.168.1.4
Exporter Plus
IP = 192.168.1.3
IBOC Data