NAUMANN NM300 TRADITION, Инструкция по эксплуатации

Страница: 3 / 21

This appliance is equipped with a thermostat system. This system will
automatically cut off the power supply to the appliance in case of
overheating.
If you appliance suddenly stops running:
1. Pull the mains plug out of the socket.
2. Press the switch button to turn off the appliance.
3. Let the appliance cool down for 60 minutes.
4. Put the mains plug in the socket.
5. Switch the appliance on again.
Please contact your dealer of an authorized service center if the thermostat
system is activated too often.
If you plug in, the indictor light will be on.
CAUTION:
In order to avoid a hazardous situation, this appliance must
never be connected to a time switch.
1. Read these instructions for use carefully and look at the illustrations
before using the appliance.
2. Keep these instructions for future reference.
3. Check if the voltage indicated on the appliance corresponds to the local
mains voltage before you connect the appliance.
4. Never use any accessories of parts from other manufacture .Your
guarantee will become invalid if such accessories or parts ha
v
e been
used.
5. Do not use the appliance if the mains cord, the plug or other parts are
damaged.
6. If the mains cord of this appliance is damaged, it must always be
replaced by manufacture or a service center authorized, in order to
avoid hazardous situations.
7. Thoroughly clean the parts that will come into contact with food before
you use the appliance for the first time.
8. Unplug the appliance immediately after use.
INTRODUCTION
IMPORTANT