Single Use Pre-
Sized XactTrace™ Belt System User Instructions
9
Cleaning
Wipe the snap sensor and RIP processor modules (if used) clean with a
moist cloth containing hospital-grade laundry detergent, and dry with a
clean, dry cloth. Take care to avoid contacting the sensor connector and
plug of the snap sensors or processor modules with the cleaning
solution. The snap sensors and RIP processor modules (if used) do not
require sterilization.
The belts should be discarded after use, and do not require cleaning.
Labeling Definitions
This symbol indicates that the item should not be reused and
is intended for a single-use only.
Maintenance
No special maintenance of the Single Use Pre-Sized XactTrace belt
system is required.
Warranty
Embla warrants the sensor to be free of defects in materials and
workmanship for 6 months from the date purchased. The sole liability of
Embla and our distributors is limited to replacement or repair of the
product at the option of Embla, with no charge for parts or labor if any
part is proven to be defective in workmanship, performance, or materials
during the warranty period. Under no circumstances shall Embla or our
distributors be liable for any loss of revenues or damage, direct,
consequential, or incidental, including loss of profit, property damage, or
personal injury arising from the use of, or the inability to use this product.
This warranty is intended for the original buyer and is in lieu of all other
warranties or previous agreements, expressed or implied. This warranty
is rendered void if the product is used for anything other than its intended
purpose or is subject to abuse, misuse, tampering, neglect or
unauthorized modifications. Use of this product constitutes acceptance of
this warranty in total.
