Quick Guide:
Bio-logic
®
AuDX PRO FLEX
®
Diagnostic OAE and audiometry
Otometrics - Next generation Bio-logic products
6
Bio-logic
®
Overall screening test result
Probe fit override
for patients with PE
tubes or middle ear
perforations
Progress for each
tested frequency
Overall test progress
Noise floor level
Red (right ear) or blue (left
ear) bars show response
amplitude. Grey bars show
noise amplitude
Switch to results of the other ear
after both ears have been tested
Print results to a label or
to a pdf file
Note: These circles indicate
that other screens are available
to view. Swipe your finger right
or left to get other views
Retest frequencies that
did not pass
Test other ear
Green check marks indicate
valid response. Red circles
indicate no valid response
DPOAE screening test results
Please note that the initial result screen depends on the module settings in "DPOAE Preferences"
A calibration will be performed prior to measurement. A green light indicates successful calibration.
After successful ear probe calibration, the test will start automatically.
