Quick Guide:
Bio-logic
®
AuDX PRO FLEX
®
Diagnostic OAE and audiometry
Otometrics - Next generation Bio-logic products
5
Bio-logic
®
As you present the
stimulus, the current level
will be displayed in the
corresponding square.
Once the hearing status
for a frequency has been
identified, move on to
the next frequency.
Once the test is finished, you can save the results, print to a label (a label printer is required)
or print to a pdf file.
Connect the red probe to the red
connector and select one of the
Presets for DPOAE Quick. To perform
binaural testing, also connect the
blue probe to the blue connector.
Select the appropriate ear tip
size and place it on the probe
tip. Insert the probe in the ear
making sure that the ear tip
fits tightly into the ear canal.
Select the test ear by pressing
either the
Right
or
Left
button, or the
Right + Left
button for binaural testing.
Cartoon mode will start
the test showing a cartoon
instead of the progress bar.
Once all frequencies have been tested for one
ear, you can test the other ear
Tapping twice on a
square will display NR
(no response)
Tap three times to get
back to blank square
Distrotion Product Otoacoustic Emissions (DPOAE): Screening
