natus ErgoJust LTM, Инструкция по эксплуатации

Страница: 41 / 86

Natus ErgoJust and ErgoJust ICU Cart System
July 6, 2020 3-11
2. Feed two screws through the Video Pole mounting holes and thread them into the bracket until
the ends of both screws are flush with the back side of the bracket (Figure 2).
Figure 2: Thread both screws until they are flush with the bracket.
3. If necessary, repeat steps 1 and 2 for the second bracket.
2. Mount the video
pole
IMPORTANT : Press all four screws inwards until they are tight against the Video Pole (Figure 3)
when performing the next step. This is necessary to position both brackets properly in order to slide
the brackets into both grooves on the bottom mast.
Figure 3: Press in all four screws tight to the Video Pole.
Legend Description
A Video Pole
B Flush
C Bracket
Legend Description
A
Video Pole
B
Flush
C
Bracket