Nature House Brand TM12, Руководство по сборке

Страница: 9 / 30

9
4. Place top floor on bottom floor.
Making sure seams in floors are
aligned.
Locate in proper position over di-
viders below by inserting the two
round top tabs on the top of each
divider into round holes in the top
floor.
BE SURE round tabs are to the in-
side of each divider front (hidden)
on the top floor.
DOOR ROD
3. Install door rods in upper floor.
2. Continue around the floor alter-
nating dividers and interlocking
them as you proceed.
Place bottom floor assembly on 2x4 ’ s or
an open box—to keep it level. Position
floor with seam as shown.
Note: The rope must be pulled up through
the second floor. It will continue to be
pulled up through the ceiling and finally
the roof.
HOUSE ASSEMBLY INSTRUCTIONS
•
ROOM DIVIDERS / PLACE UPPER FLOOR