Nature House Brand TM12, Руководство по сборке

Страница: 11 / 30

11
W
R
E
NC
H
6
. Install one 6-32 acorn nut on one
end of each tie rod (finger tight).
Use small wrench after starting.
Insert tie rods into round hole locat-
ed between each set of “D” holes
about 2” from edge on ceiling. Ro-
tate tie rod slowly and secure the
end that protrudes from bottom
floor with a second acorn nut.
Carefully handle assembly until all
tie rods have been tightened. In-
spect house assembly to insure all
door rods are in place and all tabs
from bottom floor are to the inside
of divider above them.
Then using the two wrenches pro-
vided to tighten acorn nuts on tie
rods until snug.
HOUSE ASSEMBLY INSTRUCTIONS • TIE RODS SECURING BODY OF HOUSE
W
R
E
NC
H