13
Installation and Maintenance Manual
14. COUNTER TOP MODEL TAP INSTALLATION:
1.
Locate the two Taps. They are in the top pad of the packaging.
2.
Starting on the left, install the Carbonated Water Tap with Flow Adjustment.
3.
Place the Tap into the front panel
fi
tting. Ensure the Tap is aligned vertically.
Push the Tap all the way back into the
fi
tting.
4.
Screw the Front Panel Fitting to the Tap body. To tighten, turn the chrome ring on
the Front Panel Fitting counter clockwise.
5.
The Tap should have a tight
fi
t with the front panel
fi
tting.
6.
Repeat this process with the Still Water Tap. It assembles on the right side.
7.
Proceed to Section 18.
VERTICALLY
ALIGNED
FRONT PANEL
FITTING
TAP BODY
(CARBONATED WATER TAP)
TURN CHROME RING COUNTER
CLOCKWISE TO TIGHTEN
FLOW ADJUSTMENT
(ADJUST TO 1 LITER/15 SEC)
