(
9
)
Headphone CUE button
: Sends the Mixer channel’s audio signal to the CUE channel for pre-
paring the next transition and previewing tracks.
(
10
)
Channel Level Meter
: Gives you visual feedback of the GAIN level on that Mixer channel.
The blue LEDs indicate the signal below clipping and the red LED indicates the signal is clipping.
For more information, refer to
Adjusting Volume Levels
.
(
11
)
Crossfader
: Lets you transition between the loaded tracks. It controls the mix between the
Mixer channels’ audio signals assigned to its left and right side. At each crossfader end, the oppo-
site signals are totally cut. Moving the crossfader gradually fades in and fades out the relevant au-
dio signal in the Master output. At the center position, both audio signals are fully audible.
5.3. Mixer Channel
The left and right Mixer channels provide you with the following control elements:
Mixer Channel.
(
1
)
GAIN knob
: Adjusts the input level of the signal coming from the corresponding Deck.
(
2
)
HI knob
: Emphasizes, attenuates, or removes the high frequency band of the audio signal.
(
3
)
MID knob
: Emphasizes, attenuates, or removes the middle frequency band of the audio signal.
(
4
)
LOW knob
: Emphasizes, or attenuates, or removes the low frequency band of the audio sig-
nal.
(
5
)
Mixer FX Amount knob
: The Mixer FX Amount knob controls the amount/ratio of the Mixer FX
to be applied to the audio signal. In the center position the Mixer FX is disabled.
TRAKTOR KONTROL S2 Overview
18
