5.8
Macro Controls Section
SKANNER has four modulation macro controllers. These can be used with remote controllers,
in a keyboard setting roughly corresponding to a volume or expression pedal, and the modula
tion wheel. The first two controllers (
SOURCE
and
VARIATION
) have 3 assignable destinations
and the second two controllers (
FILTER
and
SPACE
) have two assignable controllers. All con
trollers can be assigned to volume/expression pedals and a Mod Wheel, or to other MIDI con
trollers, e.g., XY pads. They can also be controlled by sequencer automation curves. In addi
tion, you can assign the monophonic LFO as an internal source of periodic movements.
The modulation amount for controller targets can be set by the corresponding faders. Sliding
the fader to the right causes positive modulation, sliding it to the left, causes negative modula
tion amounts. This means that for positive modulation amounts the target parameter is in
creased as the macro controller is increased in value. For negative modulation amounts the tar
get parameter would be reduced as the macro controller is increased in value.
5.8.1
Macro Controller Parameters
View B — Macro Controller section overview
[1]
SOURCE
LFO Rate:
SOURCE
controls the LFO rate of the assigned parameters.
[2]
VARIATION
LFO Rate:
VARIATION
controls the LFO rate of the assigned parameters.
[3]
FILTER
LFO Rate:
FILTER
controls the LFO rate of the assigned parameters.
[4]
SPACE
LFO Rate:
SPACE
controls the LFO rate of the assigned parameters.
Overview of SKANNER Ensemble
Macro Controls Section
SKANNER - Manual - 48
