◦
GATE OPEN LAMP: This lamp indicates if the
GATE
is open. It does not show the ef
fect of the
ATT
(Attack) and
REL
(Release) times.
◦
GATE/NOTES ATT: Attack time for the
GATE
and
NOTES
signals that are used to control
the
EXCITER
level and the
SUM
level. -20 - 0 - 20 - 40 - 60 - 80: 0.1 - 1 - 10 - 100 -
1000 - 10000 ms.
◦
GATE/NOTES REL: Release time for the
GATE
and
NOTES
signals that are used to con
trol the
EXCITER
level and the
SUM
level. 0 - 20 - 40 - 60 - 80: 1 - 10 - 100 - 1000 -
10000 ms.
◦
NOTES EXC: Enables the gating of the
EXCITER
signal by
NOTES
. The
ATT
(Attack) and
REL
(Release) times of the
GATE
section will also apply. If
GATE
is also enabled for the
EXCITER
both signals need to be active to open the
EXCITER
output.
◦
NOTES REL: Enables the damping of the Modal Bank by Note-Off events. The damp
ing amount is set by the
RELEASE
knob in the
DECAYS
section. If
REL
by
GATE
is also
enabled, the signal will dampen with MIDI notes and NOTES 1-6 off or when the
Gate signal is off.
◦
NOTES ENV: Enables the triggering of the Envelope by notes.If
GATE
is also enabled
for the Envelope both signals need to be active to start the Envelope.
◦
NOTES SUM: Enables the gating of the Sum (output) signal by notes. The
ATT
(At
tack) and
REL
(Release) times of the
GATE
section will also apply. If
GATE
is also ena
bled for SUM both signals need to be active to open the Sum output.
◦
GATE EXC: Enables the gating of the Exciter signal by the audio-triggered
GATE
. The
ATT
(Attack) and
REL
(Release) times of the
GATE
section apply here.If
NOTES
is also
enabled for the
EXCITER
both signals need to be active to open the
EXCITER
output.
◦
GATE REL: Enables the damping of the Modal Bank by the closing of the
GATE
. The
damping amount is set by the
RELEASE
knob in the
DECAYS
section. If
REL
by
NOTES
is
also enabled, the signal will dampen when either the Gate signal is off or when
MIDI notes and
NOTES 1-6
are off.
◦
GATE ENV: Enables the triggering of the Envelope by the signal from the
GATE
detec
tor. If
NOTES
is also enabled for the Envelope both signals need to be active to start
the Envelope.
Overview of the REAKTOR PRISM FX Interface
Overview of the REAKTOR PRISM FX Interface
REAKTOR PRISM - Manual - 49
Содержание Reaktor Prism
Страница 1: ...Manual...