Native Instruments Reaktor Prism, Руководство пользователя

Страница: 20 / 58

The modulation amount for controller targets can be set by the corresponding faders. Slid­
ing the fader to the right causes positive, sliding it to the left, negative modulation
amounts. This means that for positive modulation amounts the target parameter is in­
creased as the Macro Controller is increased in value. For negative modulation amounts
the target parameter would be reduced as the Macro Controller is increased in value.
5.3.1 PRISM – Modulation Targets for Each Controller
MC1/MC2 First Controller Modula­
tion List
MC1/MC2 Second Controller Modu­
lation List
MC1/MC2 Third Controller Modu­
lation List
Exc: Env A Exc: Env R Exc: Impulse
Exc: Noise Exc: FB Exc: Ext FB
Exc: Timer Exc: Max Exc: Lo Cut
Exc: Hi Cut Modal: Bend Modal: Multi
Modal: HP Modal: HP Slope Modal: Release
Modal: Time Modal: Hi Amt Modal: Cutoff
Modal: Fund Modal: A Modal: B
Modal: Shift Modal: A/B Bal Modal: RM
VDelay: Time VDelay: Phase Modal: 2nd H
Mixer: Sat Mixer: Exciter Mixer: Delay
Mixer: Sum Mixer: Sum Mixer: Sum
LFO: Rate LFO: Amount 1 LFO: Amount 2
Cabinet: Drive Cabinet: Tilt Cabinet: Mix
Cabinet: Level Cabinet: Hi Cut 8P Filter: Center
8P Filter: LR 8P Filter: Gap 8P Filter: Mix
8P Filter: Balance 8P Filter: Reso Flanger: Time
Flanger: FB Flanger: Rate Flanger: Depth
Flanger: Mix Echo: Time Echo: LR
Overview of REAKTOR PRISM Ensemble
Macro Controller Section
REAKTOR PRISM - Manual - 20