Native Instruments BATTERY 4, Руководство пользователя

Страница: 33 / 84

•
Sampler : In Sampler mode, BATTERY stores sample data in the system memory, reads it out
from memory, and applies any needed pitch-shifting by re-sampling the audio data.
•
Standard : Activates BATTERY's standard sampler engine.
•
Vintage : Activates vintage interpolation modes, which emulate the sonic characteristics of
two legendary samplers often used in Hip Hop and electronic music. With Vintage mode
active, you can select one of the sampler emulations from the drop-down menu below.
•
DFD : Streams samples Direct From Disk instead of RAM. This is important if you have large
samples but limited RAM.
•
Stretch : In Stretch mode, BATTERY uses granular synthesis to alter sample speed while
preserving the original pitch information.
•
Standard : Activates BATTERY's standard stretch engine. It contains the following
parameters:
•
Grain : Adjusts the size of the sound particles used for resynthesis.
•
Speed : Changes the playback rate independently of pitch. The length values are
expressed as a percentage of the original length: for example, 100% plays back the
sound at the original speed, 200% doubles the speed, 50% halves the speed, etc.
•
Smooth : Adjusts the number of granular micro-envelopes to reduce unwanted artifacts,
thus altering the sonic character of the resynthesis process. Note that small values
generally cause a buzzier sound.
•
Pro : Activates BATTERY's Pro stretch engine.
•
Speed : Changes the playback rate independently of pitch. The length values are
expressed as a percentage of the original length: for example, 100% plays back the
sound at the original speed, 200% doubles the speed, 50% halves the speed, etc.
•
Beat : Sets options for Beat mode. When you load a sample containing timing information
(such as a REX file, an ACID wav file, or an Apple Loop file) into a cell in BATTERY, the Engine
module will automatically be set to Beat mode. The individual slices of the sample will
playback at the speed determined by the module's controls, or synchronized to BATTERY's
internal clock (or that of your host application), depending on the module's settings in its Sync
menu. It contains the following parameters:
•
Expand : Expands the individual slices of the sample to individual cells in BATTERY, starting
with the next empty cell. In BATTERY's preferences (refer to Loading ), there is also a setting
to make this the default behavior.
•
Sync : Adjusts the sync mode between BATTERY and your DAW. Selecting Sync Off
uncouples the sample from BATTERY's internal tempo or that of your host software.
Selecting one of the note values synchronizes the sample's slices to the beats of
BATTERY's internal clock (or that of your host software).
•
Speed : Alters the sample’s playback speed without altering its pitch.
•
Smooth : Adjusts the attack and release of the individual slices to prevent clicks.
10.5. Filter
A simple high-pass/low-pass filter to be applied to the selected cells.
The
Filter module contains the following parameters and controls:
MAIN PAGE 29