Native Instruments AUDIO KONTROL 1, Руководство по эксплуатации

Страница: 43 / 118

AUDIO KONTROL 1 – 43
5.3.3. Controlling GUITAR RIG 3 LE
In order to control parameters within GUITAR RIG 3 from the AUDIO KONTROL 1’s
control elements, you need to “connect” GUITAR RIG 3 LE to the Mapping
Applications. This way, GUITAR RIG 3 LE can receive the MIDI messages coming
from the Mapping Application. To establish a connection between GUITAR RIG 3 LE
and the Mapping Application, follow these steps:
As with setting up the audio connections, open the “Audio and MIDI Settings”
from GUITAR RIG 3 LE’s File menu.
Select the MIDI Tab and activate both input ports of AUDIO KONTROL 1 by
clicking their “Off” labels. If the labels already read “On” for both inputs, you
don’t need to change the options.
Click “OK” to close the dialog box.
Now you need to select the NI AUDIO KONTROL 1 Control Page that is copied to
your hard disk during the Guitar Rig 3 LE installation procedure. Navigate to the
Options inside GUITAR RIG 3 LE’s Sidekick and enter the Controller Assignments
section. You can choose the template as shown in the Screenshot below. Please
refer to the GUITAR RIG 3 manual to learn all about GUITAR RIG 3 LE.
►
►
►