AUDIO KONTROL 1 – 29
Important:
You can install the additional software bundle by using the seper-
ate installers on the installation disc.
4.3. Configuring Third-Party Software
4.3.1. The MIDI ports of AUDIO KONTROL 1
AUDIO KONTROL 1 contains one MIDI input port and one MIDI output port on the
hardware side. However, when you configure your software applications to interact
with the AUDIO KONTROL 1 hardware, you will note that the driver offers a second
MIDI input/output pair.
The first MIDI pair can be used to access the hardware ports. Activate them if you
want to control your software with external MIDI gear (e.g. a master keyboard) or
if you want to send MIDI messages to any other hardware.
The second pair is obviously not present at the hardware. Instead, it is used by
the Mapping Application to send MIDI messages to your applications. Only if your
application uses this second pair of MIDI ports, the Mapping Application will be
able to control it via MIDI.
Of course, you can combine both ports, i.e. your application can use the external
MIDI input and the virtual input at the same time.
Содержание AUDIO KONTROL 1
Страница 1: ...OPERATION MANUAL...
Страница 16: ...AUDIO KONTROL 1 16 The AUDIO KONTROL 1 Top Panel...
Страница 110: ...AUDIO KONTROL 1 110 9 Appendix 9 1 Technical Specifications and Block Diagram...