10.8.3 CHORD Position
The third
CHORD
parameter is
Position
. On the keyboard, it is mapped to Knob 7 of the Con-
trol section in Scale Edit mode. Use it to spread the notes of a chord generated from a single
note and to aid a more musical transition between chords.
The
CHORD
parameter
Position
.
The
Position
parameter is available when
CHORD
Type
is set to
Harm
or
Chd Set
and includes
the following values:
Position
Description
Root
The root-position of the selected chord is always played.
-1
to
-8
Decreasing
Position
with negative values moves the highest note
of the current chord down by an octave, this inverts the chord to
a lower position in the selected scale.
+1
to
+8
Increasing
Position
with positive values moves the lowest note of
the current chord up by an octave, this inverts the chord to a
higher position in the selected scale.
Auto
This provides a more human feel in the transition from one chord
to another. The notes used to form each chord are automatically
selected to provide the best inversion.
Smart Play – Playing and Editing Scales and Chords
Setting the CHORD Parameters
KOMPLETE KONTROL A-Series - Manual - 128
Содержание A Series
Страница 1: ...MANUAL ...
