7. Move gently the linear motor assembly down and
unhook it from the housing A. Remove the lead wire
tube from the housing A.
8. Pull up the battery and chassis block at the linear motor
side first. Then, slide it upward and take it out from the
housing A.
NOTE:
Do not pull the battery and chassis block forcefully
due to connecting the linear motor by the lead wires.
9. Remove the battery waterproof rubber from the battery
pins.
10. Take out the batteries from the chassis.
11. Unsolder the lead wires from the module.
12. Remove the right and left side of the float guides from
the front.
4
ES8093-A3
