Follow the procedure below to disassemble the main unit.
1. Remove the cap, the outer foil with foil frame and the
inner blade.
2. Set the trimmer at about 19mm sliding above. To
unhook the right and left side of upside hooks, slightly
pull the trimmer forward. Then, slightly pull the trimmer
in each side.
3. To remove the trimmer driving bar or the slit blade
driving bar, press bars outward.
4. Remove the back panel and loosen a screw.
5. Remove the two screw caps using something like a
toothpick and loosen the six screws.
6. Take out the right and left side of the float suspensions
and the action selector fixture.
3 DISASSEMBLY INSTRUCTIONS
3
ES8093-A3
