National Vendors shoppertron 431, Руководство оператора

Страница: 22 / 74

Shoppertron
TM
Operator’s Guide
July, 2003 Page 18 4310114
ENTER A NEW DATA RECALL CODE
(Supervisor Mode Only)
If the proper non-zero code is entered, sales and non-resettable sales data can be
viewed without opening the machine’s door.
1. Follow the steps in "Gain Access to the Supervisor Mode" on page 17.
2. Press , then until the display shows
NR XXXX
. The X's
represent the currently entered code. Use the number keys to enter a new
code, if desired. Do not use any zeros in the code, as there is no way to
enter a zero with the machine door closed.
NOTE
A code of 0000 disables this feature and is also the default.
Usage:
With the machine in ready mode, enter the 4-digit code by sliding the door of
the level that corresponds to the number you wish to enter. For example, to
enter 1122, slide a door on the top level twice, then slide a door on the sec-
ond level twice.
NOTE
The last door you slide must be off-line (in a non-vendable
position) for the sales total to display.
When the correct code is entered, the non-resettable sales total is displayed.
The machine total will show in the main display, and the dollar total for each
level will show in the price displays. To see the exact total for a level, slide a
door on that level to the right. The dollar and cents total will show on the
main display.
This display will remain active for 9 seconds, or until another key is pressed.
3. CONTINUE.