DANGER
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open lid.
4. If odor continues, keep away from the appliance and immediately
call your fire department.
Failure to follow these instructions could result in fire or explosion
which could cause property damage, personal injury or death.
DANGER
1. Never operate this appliance unattended.
2. Never operate this appliance within 10 ft (3.0 m) of any structure,
combustible material or other gas cylinder.
3. Never operate this appliance within 25 ft (7.5 m) of any flammable
liquid.
4. Do not fill cooking vessel beyond maximum fill-line.
5. Never allow oil or grease to get hotter than 400°F or 200°C. If the
temperature exceeds 400°F (200°C) or if oil begins to smoke,
immediately turn the burner or gas supply OFF.
6. Heated liquids remain at scalding temperatures long after the
cooking process. Never touch cooking appliance until liquids have
cooled to 115°F (45 °C) or less.
7. If a fire should occur, keep away from the appliance and
immediately call your fire department. Do not attempt to extinguish
an oil or grease fire with water.
Failure to follow these instructions could result in fire, explosion
or burn hazard which could cause property damage, personal
injury or death.
This instruction manual contains important information necessary
for the proper assembly and safe use of the appliance
.
Read and follow all warnings and instructions before assembling
and using the appliance.
Follow all warnings and instructions when using the appliance.
Keep this manual for future reference.
REMOVING BURNER AND VENTURI TUBE
1. Turn grill bottom side up.
2
.
Remove screw “B”(see diagram below)
Do Not Lose
Washer.
3. Turn nut “A” (see diagram below) counter clock wise
until burner and tube are free.
4. To install new burner and tube, reverse steps #2 and #3.
Important - Venturi tube must fully engage valve
nut A to fully engage threads on Venturi tube.
Nut A must be turned to full length of threads.
Page 1