L M K 0 3 0 0 2 C
E V A L U A T I O N B O A R D O P E R A T I N G I N S T R U C T I O N S
15
The Registers tab shows the raw bits which will be programmed when device is loaded by
clicking Keyboard Controls
Load Device or Ctrl+L.
The Clock Outputs tab allows the user to visualize the clock distribution portions of the device.
From this tab the device’s dividers, delays, clock output muxes, and output drivers can be
programmed along with internal loop filter values. The PLL block shows the R and N divider
values however to change these values either click on the PLL tab or the blue PLL box to access
the PLL tab to make changes to the PLL.
