National Semiconductor ADS42B4 Series, Руководство пользователя

Страница: 6 / 17

Basic Test Procedure
www.ti.com
Table 1. Default ADS42Bxx EVM Revision A Jumper Setting for Serial Interface (continued)
Jumper Default position Function
JP14 Short 7 - 8 ADC 2’s complement, DDR LVDS
JP5 Short 1 - 2 ADC CTRL3, normal operation
JP6 Short 1 - 2 ADC CTRL2, normal operation
JP7 Short 1 - 2 ADC CTRL1, normal operation
JP 18 Short 1 - 2 Ext Buffer
JP 23 Short 1 - 2 Ext Buffer
JP 24 Short 1 - 2 Ext Buffer
JP 25 Short 1 - 2 Ext Buffer
JP30 Short ADC buffer 3.3-V supply
Table 2. Parallel Interface with Pin Control of ADS58C28 and ADS42Bxx EVM Revision B Jumper
Setting
Jumper Position Function
JP8 Short 1 - 2 ADC SCLK for parallel control
JP9 Short 1 - 2 ADC SDATA for parallel control
JP10 Short 1 - 2 ADC SEN for parallel control
JP11 Short 1 - 2 ADC parallel control
2.3 Test Set-Up Connections
• Connect the ADS42B4x EVM to TSW1400 EVM
• Connect 5-V power to banana jack at J10; connect ground to J12
• Connect USB cable to programming computer at J17
• Connect USB and power supply jack to TSW1400
• Connect the clock signal through the appropriate BPF to J19
• Connect the input signal through the appropriate BPF to J6/J3
6 ADS42B4x EVM SLAU477A – December 2012 – Revised January 2015
Submit Documentation Feedback
Copyright © 2012–2015, Texas Instruments Incorporated