Software Control
●
Low Speed Mode ChB:
Low-speed mode for channel B
●
LVDS Data Strength:
Set the data strength from this switch
●
LVDS Clkout Strength:
Set the output clock strength from this switch
●
CMOS Clk Strength:
Set CMOS output clock strength from this switch
●
ClkOut Delay:
Programming the delay of CLKOUT
●
Offset Correction:
Enables or Disables offset correction
●
ChA Offset Pedestal:
Programming Channel A for different offset pedestals
●
ChB Offset Pedestal:
Programming Channel B for different offset pedestals
Figure 1. ADS42Bxx_GUI Front Panel – Top Level
1.2.2
Register Control
●
Send All:
Sends all the register configurations on the panel to the device
●
Read All:
Not active
●
Save:
Saves the register configuration to text file
●
Load:
Loads a register file from a text file. After loading registers, the relative switches and
selecting boxes are automatically updated.
— Select
Load
button
— Double click on the desired register file
— Click
Send All
to ensure all of the values are loaded properly
3
SLAU477A – December 2012 – Revised January 2015
ADS42B4x EVM
Copyright © 2012–2015, Texas Instruments Incorporated
