National Luna Power Pack DC25, Руководство пользователя

Страница: 8 / 20

6
Installing Battery
Note : Select the battery type before installing the auxiliary battery. See page 5.
To hold a battery securely in the Power Pack, install the U-bolt and hold-down bracket.
It is best to lay the Power Pack on its side or end to do this.
Insert the U-bolt through the holes
drilled into the bottom of the
Power Pack.
Return the Power Pack to the
upright position.
Remove the Power Pack sliding lid
and insert the auxiliary battery into
the battery compartment.
Connect the positive (RED) and
negative (BLACK) cables to the
battery terminals.
Make sure the connections are
clean and tight
Take care not to over-tighten the
screws.
Attach the hold-down bracket,
washers and wing-nuts.
1
2
3